Problem with Comand 2.0 and the Telephone system -- MB-Treff.de/Forum

MB-Treff.de/Forum - https://www.mb-treff.de/forum/main.php
  ~~ Technik und Zubehör ~~ - https://www.mb-treff.de/forum/main.php?cat=3
    Car HiFi - https://www.mb-treff.de/forum/board.php?id=15
      Problem with Comand 2.0 and the Telephone system - https://www.mb-treff.de/forum/thread.php?id=7487

Geschrieben von Grozdanov am 21.01.2013, 15:11 Uhr:

Hello from Bulgaria,

I turn to you with a special request for help. A year ago I bought a Mercedes CLK W209. I drove the car in workshop because I wanted to installed a CD-Changer. And from there the problems started. The mechanics failed to install the changer, then noticed that the navigation and the phone no longer work. Now, the computer recorded the following errors:

B1762 Fault in CAN communication with component A40/3n2 (Navigation processor).
N1112 No data transfer between D2B master and D2B predecessor component possible.

I Changed the telephone module (back in the trunk) just plug-and-play, but again telephone doesn't work. After that I removed this module and now the navigation work, but the phone doesn't work. On the display writes: No Phone, Tel Error. Someone have idea for my problem?

Sorry for my bad english.

Geschrieben von spookie am 21.01.2013, 15:39 Uhr:

A very special problem. I would recommand please contact Holgi, he is a specialist in those things and can help. But please be aware that it could be some days until an answer will come because he gots a lot of mails every day.

holgi2002@geo24.de

Geschrieben von Grozdanov am 21.01.2013, 16:14 Uhr:

Zitat:
Original von spookie:
A very special problem. I would recommand please contact Holgi, he is a specialist in those things and can help. But please be aware that it could be some days until an answer will come because he gots a lot of mails every day.

holgi2002@geo24.de

Thank you, I will contact with Holgi. Any information will help me. Thank you friends.

Best Regards from Bulgaria

Geschrieben von Grozdanov am 29.03.2013, 09:44 Uhr:

Zitat:
Original von Grozdanov:

Zitat:
Original von spookie:
A very special problem. I would recommand please contact Holgi, he is a specialist in those things and can help. But please be aware that it could be some days until an answer will come because he gots a lot of mails every day.

holgi2002@geo24.de

Thank you, I will contact with Holgi. Any information will help me. Thank you friends.

Best Regards from Bulgaria

Hello again,
Holgi not answer me. I change the all optical cable with new and the problem is the same. Is it possible the problem is in Comand? When I put the phone in the cradle on the phone display write "No Charge"

Geschrieben von spookie am 29.03.2013, 17:43 Uhr:

Maybe your email was marked as Spam to him, send again. Here his page: http://www.pocketnavigation.de/impressum/

Was the Audio Ring rebootet with StarDiagnose?

Geschrieben von Grozdanov am 01.04.2013, 08:37 Uhr:

Zitat:
Original von spookie:
Maybe your email was marked as Spam to him, send again. Here his page: http://www.pocketnavigation.de/impressum/

Was the Audio Ring rebootet with StarDiagnose?

I disconnected battery for 10 minutes. Then I restarted the fiber optic cable and I erased all faults. Now sometimes works the phone sometimes not work. When not works I turning off and then turning on the audio system Comand and unplug and plug the phone and he works again. Have any idea where is the problem and how I can fix it? And when I turn off the car and after few minutes the phone turns itself off. Thank you!

Geschrieben von spookie am 01.04.2013, 17:09 Uhr:

Battery disconnect is not the reboot I mean, the reboot can only be done with the StarDiagnose. This helped in my System last year. Maybe you too.

Geschrieben von Grozdanov am 02.04.2013, 07:41 Uhr:

Zitat:
Original von spookie:
Battery disconnect is not the reboot I mean, the reboot can only be done with the StarDiagnose. This helped in my System last year. Maybe you too.

I tryed and with reboot, but not help me this... :( Today not working the phone...

Geschrieben von Grozdanov am 07.06.2013, 20:57 Uhr:

Zitat:
Original von Grozdanov:

Zitat:
Original von spookie:
Battery disconnect is not the reboot I mean, the reboot can only be done with the StarDiagnose. This helped in my System last year. Maybe you too.

I tryed and with reboot, but not help me this... :( Today not working the phone...

Hello again,
I change the all optical cable with new and the problem is the same. Is it possible the problem is in Comand? When I tryed to reading the telephone module with Star Diagnoses I recieved error similar to "Too low voltage" and for that I think that the problem may be in telephone module, but how I can be sure? Because sometimes the telephone works, sometimes not works. And when I disconnect the battery, after that the first time the telephone works and I read successful the module. Anyone have any idea?